Source for propeller

Source for propeller
Posted by Rusty West at 2014-02-10 14:20:30

I am looking for a source to buy a different size and style of propeller that will fit the  required motor.  Anyone have suggestions?  I could not find anything on and ebay kept giving me a stainless steel propeller that would not work.

Re: Source for propeller
Posted by Perry Weinthal at 2014-02-19 23:20:36

Rusty: if you find the master parts list -- sadly it is very well hidden, when it should be a front page link.
I found it .

Propellers - Plastic 1/8" Shaft Size 3 Tower Hobies LXE472
Propeller Shaft Threaded Coupler 3 Tower Hobies LXK089
Threaded Insert Tee Nut 3 McMaster-Carr 90975A002
Nylon-Insert Hex Locknut 4-40 - Stainless Steel 3 McMaster-Carr 91831A005

At the National Competition they had a Propeller shaft coupler with a set screw - so you did not need super glue.

If anyone knows where to find these PLEASE post a link or part number.

Hope this helps!

Edited by Perry Weinthal on 2014/02/20 22:04:17

Edited by Perry Weinthal on 2014/02/20 22:14:24

Re: Source for propeller
Posted by Ethan Coe at 2017-10-04 18:54:11

Thanks this was very helpful.

Please report website issues to

The SeaPerch logo is a Registered Trademark of the AUVSI Foundation.

Terms of Use & Privacy | Copyright 2013. All Rights Reserved.